Comparison of Bond Strength Between Three Types of Denture Teeth and the Acrylic Resin of a Complete Removable Denture Base
Comparison of Bond Strength Between Denture Teeth and the Acrylic Resin
Keywords:
Shear Bond Strength; Heat-Cured Denture Base Resin; Denture TeethAbstract
Introduction: To prepare a denture, the patient, dentist, and technician spend considerable time and money. The most common denture repair is the replacement and repair of detached teeth in a prosthesis. This study aimed to compare the bond strength between three different types of artificial teeth and a heat-cured acrylic denture base. Materials and Methods: In this in vitro experimental study, the shear bond strength of three groups of artificial teeth, including Apple & Glamor composite and B-Star nanocomposite, to a heat-cured acrylic resin denture base was compared. 10 samples were selected from each group. Samples were attached to the heat-cured resin. For bond strength assessment, the samples were placed in a universal testing machine and subjected to shear force at 1 mm/min speed, and the fracture load was recorded. Using SPSS 23 software and descriptive statistics, the mean force of fracture and the standard deviation of samples were calculated. One-way ANOVA and Tukey tests were used to compare the shear bond strength of the samples. Results: the mean shear bond strength of Apple composite teeth was recorded at 336 N. Also, for Glamor composite and B-Star nanocomposite denture teeth, the mean shear bond strength were recorded at 246 N and 154 N, respectively. Conclusion: The highest shear bond strength belong to Apple composite teeth and then to Glamor composite and B-Star nanocomposite denture teeth, respectively.
References
Saavedra G, Neisser MP, Sinhoreti MAC, Machado C. Evaluation of bond strength of denture teeth bonded to heat polymerized acrylic resin denture bases. Braz J Oral Sci. 2004;3:458-464.
Adeyemi AA, Lyons MF, Cameron DA. The acrylic tooth denture base bond: effect of mechanical preparation and surface treatment. Eur J Prosthodont Rest Dent. 2007;15:108-114.
Critchlow SB, Ellis JS. Prognostic indicators for conventional complete denture therapy: a review of the literature. J Dent. 2010;38(1):2-9.
https://doi.org/10.1016/j.jdent.2009.08.004
PMid:19695302
Preshaw PM, Walls AW, Jakubovics NS, Moynihan PJ, Jepson NJ, Loewy Z. Association of removable partial denture use with oral and systemic health. J Dent. 2011;39:711-719.
https://doi.org/10.1016/j.jdent.2011.08.018
PMid:21924317
Emami E, Allison PJ, de Grandmont P, Rompre PH, FeineJS. Better oral health related quality of life: type of prosthesis or psychological robustness. J Dent. 2010;38:232-236.
https://doi.org/10.1016/j.jdent.2009.11.002
PMid:19931345
Nejati Danesh F, Savabi O, Erfani M. A comparative study of bonding strength between Iranian plastic teeth and Acropars resin base material. J Dent Sch. 2003;21(3):415-420.
Vallittu PK, Lassila VP, Lappalainen R. Evaluation of damage to removable dentures in two cities in Finland. Acta Odontol Scand. 1993;51:363-369.
https://doi.org/10.3109/00016359309040587
PMid:8304013
Yadav NS, Somkuwar S, Mishra SK, Hazari P, Chitumalla R, Pandey SK. Evaluation of bond strength of acrylic teeth to denture base using different polymerization techniques: A comparative study. JIOH. 2015;7(Suppl 1):54-56.
Cunningham JL, Benington IC. Bond strength variations of synthetic resin teeth in dentures. Int J Prosthodont. 1995;8:69-72.
Cunningham JL, Benington IC. An investigation of the variables which may affect the bond between plastic teeth and denture base resin. J Dent. 1999;27:129-135.
https://doi.org/10.1016/S0300-5712(98)00034-7
PMid:10071470
Barbosa DB, Barao VA, Monteiro DR, Compagnoni MA, Marra J. Bond strength of denture teeth to acrylic resin: effect of thermocycling and polymerisation methods. Gerodontology. 2008;25:237-244.
https://doi.org/10.1111/j.1741-2358.2008.00218.x
PMid:18328073
Ghasemi E, Mosharraf R, Eidi-Najafabadi A. Evaluation of bond strength of four types of multilithic teeth to acrylic denture base material. JIDA. 2010;22(4):240-247.
Mosharraf R, Mechanic N. Comparison of the effects of four prebonding preparation methods on the bond strength between a multilithic tooth and denture base resin. Dent Res J. 2008;4(2):102-105.
Gharebagh TG, Hamedirad F, Miruzadeh K. A comparison of bond strength of three types of acrylic, composite, and nanocomposite artificial teeth to heat-cured acrylic denture base resin. Front Dent.2019;16(1).
Andrade de Freitas SL, Brandt WC, Miranda ME, Vitti RP. Effect of Thermocycling, Teeth, and Polymerization Methods on Bond Strength Teeth-Denture Base. Int J Dent. 2018 Jun 4;2018:2374327
https://doi.org/10.1155/2018/2374327
PMid:29971106 PMCid:PMC6009019
Chittaranjan B, Taruna M, Sudheer N, Patil NS. Evaluation of shear bond strength of three different types of artificial teeth to heat cure denture base resin: An invitro study. Indian J Dent Res. 2013;24(3):321-325.
https://doi.org/10.4103/0970-9290.117994
PMid:24025878
Nematollahi F, Azizi N, Shahabi S, Ghahremani L, Asgari Z, Bagheri H. Comparison effect of artificial tooth type and cyclic loading on the bond strength to auto-polymerized acrylic denture base resins. JDM. 2013;26(2):81-90.
Rosthamkhani F, Gharehchahi J, Asadollahzadeh M, Zebarjad S, gharehchahi M. Comparison of tensile strength of four kind of acrylic artificial teeth to acrylic denture base in vitro. JMDS. 2012;36(2):105-112.
Naser Khaki M, Ehsani S. Comparing the bond strength of four kind of ideal-makoo artificial teeth (Iran) and two leichtenstein & Italy ivoclar teeth with prosthetic acrylic base. J Dent Sch. 2007;25(3):310-315.
Cunningham JL. Bond strength of denture teeth to acrylic bases. J Dent. 1993;21:274-80.
https://doi.org/10.1016/0300-5712(93)90106-Z
PMid:8227688
Darbar UR, Hugget R, Harrison A. Denture fracture: A survey. Br Dent J. 1994;176:342-345.
https://doi.org/10.1038/sj.bdj.4808449
PMid:8024869
Jemt T. Failures and complications in 391 consecutively inserted fixed prosthesis supported by Branemark implants in edentulous jaws: A study of treatment from the time of prosthesis placement to the first annual check up. Int J Oral Maxillofac Implants. 1991;6:270-276.
Cunningham JL, Benington IC. Effect of an experimental cement on denture tooth bond. J Dent Res. 1994;74:949.
Thean HP, Chew CL, Goh KI. Shear bond strength of denture teeth to base: a comparative study. Quintessence Int. 1996;27:774-781.
Barpal D, Curtis DA, Finzen F, Perry J, Gansky SA. Failure load of acrylic resin denture teeth bonded to high impact acrylic resins. J Prosthet Dent. 1998;80:666-671.
https://doi.org/10.1016/S0022-3913(98)70053-8
PMid:9830071
Clancy JM, Hawkins LF, Keller JC, Boyer DB. Bond strength and failure analysis of light-cured denture resins bonded to denture teeth. J Prosthet Dent. 1991;65:315-324.
https://doi.org/10.1016/0022-3913(91)90182-V
PMid:2051372
Wayne Caswell C, Norling BK. Comparative study of the bond strengths of three abrasion-resistant plastic denture teeth bonded to a cross-linked and a grafted, cross-linked denture base material. J Prosthet Dent. 1986;55:701-708.
https://doi.org/10.1016/0022-3913(86)90447-6
PMid:3522865
Cunningham JL. Shear bond strength of resin teeth to heat‐cured and light‐cured denture base resin. J Oral Rehabil. 2000;27:312-316.
https://doi.org/10.1046/j.1365-2842.2000.00522.x
PMid:10792592
Reshadi S. Comparison of bond strength between artificial resin teeth and denture base through three method of mold preparation. J Mashhad Dent Sch. 2007;36:144-149.
Harrison A, Huggett R. Effect of the curing cycle on residual monomer levels of acrylic resin denture base polymers. J Dent. 1992;20:370-374.
https://doi.org/10.1016/0300-5712(92)90031-7
PMid:1452879
Kawara M, Carter JM, Ogle RK, Johnson HH. Bonding of plastic teeth to denture base resins. J Prosthet Dent. 1991;66:566-571.
https://doi.org/10.1016/0022-3913(91)90525-2
PMid:1791572
Spratley M. An investigation of the adhesion of acrylic resinteeth to denture. J Prosthet Dent. 1987;58:3893-92.
https://doi.org/10.1016/0022-3913(87)90065-5
PMid:3305906
Morrow RM, Matvias FM, Windeler AS, Fuchs RJ. Bonding of plastic teeth to two heat-curing denture base resins. J Prosthet Dent. 1978;39:565-568.
https://doi.org/10.1016/S0022-3913(78)80195-4
PMid:349144
Radford D, Juszczyk A, Clark R. The bond between acrylic resin denture teeth and the denture base: recommendations for best practice. Br Dent J. 2014;216:16516-7.
https://doi.org/10.1038/sj.bdj.2014.99
PMid:24557385
Yamauchi M, Iwahori M, Sakai M, Koda T, Kawano J, Maeno T. Comparative bond strengths of plastic teeth to microwave-curing, heatcuring and 4-META containing denture base resins. Gifu Shika Gakkai Zasshi. 1989;16:542-550.
Suzuki S. Invitro wear of nano‐composite denture teeth. J Prosthodont. 2004;13:238-243.
https://doi.org/10.1111/j.1532-849X.2004.04043.x
PMid:15610545
Ghahramani L, Nokhbatolfoghahaei H, Shahabi S, Tamizi M, Fatemi M. Effect of different teeth preparations on the tensile bond strength of composite artificial teeth to acrylic denture base. JDM. 2014;27
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Galen Medical Journal
This work is licensed under a Creative Commons Attribution 4.0 International License.
